| PART |
Description |
Maker |
| AND8090 AND8090D MC100H601 MC100H601FN MC10H106FN |
3.3V / 5V ECL Quad 2-Input Differential AND/NAND
5V ECL Low Impedance Driver
LOW VOLTAGE DUAL 1:4, 1:5 DIFFERENTIAL FANOUT BUFFER
8 Input Priority Encoder
3.3V ECL Triple D-Type Flip-Flop with Set and Reset
3.3V / 5V ECL Quad D Flip Flop with Set, Reset, and Differential Clock
3.3V Dual Differential LVPECL to LVTTL Translator
3.3V / 5V ECL 6-Bit Differential Register with Master Reset
3.3V ECL 1:15 Differential ÷1/÷2 Clock Driver
Fibre Channel Coaxial Cable Driver and Loop Resillency Circuit
3.3 V 1:9 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3V / 5V ECL 8-Bit Synchronous Binary Up Counter
2.5 V/3.3 V SiGe Selectable Differential Clock and Data D Flip-Flop/Clock Divider with Reset and OLS
3.3V / 5V Programmable PLL Synthesized Clock Generator (25 to 400 MHz)
2.5 V/3.3 V SiGe 1:2 Differential Clock Driver with RSECL Outputs
2.5 V/3.3 V SiGe 1:10 Differential Clock Driver with RSECL Outputs
Triple 4-3-3-Input NOR Gate
9-Bit ECL-TTL Translator
AC Characteristics of ECL Devices
|
Motorola
ONSEMI[ON Semiconductor]
|
| MC100LVEL29DWR2 |
3.3V ECL Dual Differential Data and Clock D Flip−Flop With Set and Reset 100LVEL SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO20
|
ON Semiconductor
|
| MC100EL51DG MC100EL51DR2G MC100EL51DT MC100EL51DTG |
5V ECL Differential Clock D Flip-Flop 10EL SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, DSO8
5V ECL Differential Clock D Flip-Flop 10EL SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO8
5V ECL Differential Clock D Flip-Flop; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Rail; Qty per Container: 98 10EL SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO8
5V ECL Differential Clock D Flip-Flop(5V ECL 差分时钟D触发
|
ONSEMI[ON Semiconductor]
|
| MC100LVEL30DW MC100LVEL30DWG MC100LVEL30DWR2 MC100 |
3.3V ECL Triple D Flip−Flop with Set and Reset
|
ONSEMI[ON Semiconductor]
|
| MC10EP29-D |
3.3V / 5V ECL Dual Differential Data and Clock D Flip-Flop With Set and Reset
|
ON Semiconductor
|
| HCTS74KTR HCTS74T HCTS74DTR |
DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS 20-LCCC -55 to 125
Radiation Hardened Dual-D Flip-Flop with
Set and Reset(抗辐射双D触发器（带置位、复位）)
Radiation Hardened Dual-D Flip-Flop with Set and Reset
HCT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP14
|
Intersil Corporation
|
| MC100EL52DG MC100EL52DR2G MC100EL52DT MC100EL52DTG |
5V ECL Differential Data and Clock D Flip-Flop 100EL SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO8
|
ONSEMI[ON Semiconductor]
|
| 74ALS74A 74ALS74AD 74ALS74ADB 74ALS74AN 74ALS74 |
Dual D-type flip-flop with set and reset ALS SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors N.V.
|
| 74HC74DR2 74HC74DR2G 74HC74D 74HC74 74HC74DTR2G 74 |
Dual D Flip−Flop with Set and Reset High−Performance Silicon−Gate CMOS
Dual D Flip-Flop with Set and Reset(带设置和复位的双D触发 双D触发器的设置和复位（带设置和复位的双触发器）
|
ONSEMI[ON Semiconductor]
|
| 74AUP1G74GD 74AUP1G74GM125 |
Low-power D-type flip-flop with set and reset; positive-edge trigger
Low-power D-type flip-flop with set and reset; positive-edge trigger; Package: SOT902-1 (XQFN8U); Container: Reel Pack, Reverse, Reverse
|
NXP Semiconductors
|
| 5962F9863201VCC 5962F9863201V9A 5962F9863201VXC AC |
AC SERIES, DUAL POSITIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, CDFP16
AC SERIES, DUAL POSITIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP16
Radiation Hardened Dual J-K Flip-Flop with Set and Reset 辐射硬化的设置和复位JK触发
|
Intersil Corporation
Intersil, Corp.
|
| MC10EP35-D |
3.3V / 5V ECL JK Flip-Flop
|
ON Semiconductor
|
